922336

3M 922336

Part No:

922336

Manufacturer:

3M

Package:

-

ROHS:

AINNX NO:

5634890-922336

Description:

BREADBRD ASSEMBLY 10.25X9.25"

Products specifications
  • Factory Lead Time
    9 Weeks
  • Number of Pins
    14
  • Contact Materials
    Silver
  • Packaging

    Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

    Bulk
  • Series
    300
  • Published
    2003
  • Size / Dimension
    10.25 x 9.25 260.4mmx235.0mm
  • Part Status

    Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

    Active
  • Moisture Sensitivity Level (MSL)
    1 (Unlimited)
  • Type
    Assembly (On Frame)
  • Number of Contacts
    3648
  • Lead Length
    3m
  • Wire Gauge

    a measurement of?wire?diameter.?This determines the amount of electric current the wire can safely carry, as well as its electrical resistance and weight.

    22 AWG
  • Cable Length

    A nautical unit of measure equal to one tenth of a nautical mile or approximately 1 fathoms.

    3m
  • Wire/Cable Gauge
    22 AWG
  • Sensing Distance

    It is the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fluctuation. (Normally, it is 70 to 80 % of the maximum operation distance.)

    3 m
  • Number of Tie Points (Total)
    3648
  • Number of Terminal Strips
    4
  • Number of 5-Tie Point Terminals
    512
  • Number of Distribution Buses

    In electric power distribution, a busbar (also bus bar) is a metallic strip or bar, typically housed inside switchgear, panel boards, and busway enclosures for local high current power distribution. They are also used to connect high voltage equipment at electrical switchyards, and low voltage equipment in battery banks. They are generally uninsulated, and have sufficient stiffness to be supported in air by insulated pillars. These features allow sufficient cooling of the conductors, and the ability to tap in at various points without creating a new joint.

    10
  • Number of Binding Posts

    A binding post is a connector commonly used on electronic test equipment to terminate (attach) a single wire or test lead. They are also found on loudspeakers and audio amplifiers as well as other electrical equipment.

    4
  • Height
    234.95mm
  • Length
    260.35mm
  • Width
    234.95mm
  • REACH SVHC
    No SVHC
  • RoHS Status

    RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

    RoHS Compliant
  • Lead Free
    Not Applicable
0 Similar Products Remaining
Documents & Media Download datasheets and manufacturer documentation for 3M 922336.