Adam Tech EB15A-10-C

Mounting Type

Through Hole

Housing Material

Polyamide (PA66), Nylon 6/6

Contact Material - Plating

Brass - Tin Plated

Resistive Material

The resistive material is a combination of a Ceramic material and a Metal, and therefore these resistors are also referred to as Cermet. Just as with carbon film, the resistance value is adjusted by cutting a spiral pattern in the film. This can be done with an abrasive or a laser.

Carbon

Clamp Material - Plating

Phosphor Bronze - Nickel Plated

Screw Material - Plating

Steel - Zinc Plated

Package

-

Base Product Number

PT6KH

Mfr

Amphenol Piher Sensing Systems

Product Status

Active

Torque-Screw

0.29 Nm (2.57 Lb-In)

Series

PT-6

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C ~ 105°C

Size / Dimension

Round - 0.248 Dia (6.30mm)

Tolerance

±20%

Temperature Coefficient

The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

±300ppm/°C

Resistance

500 kOhms

Color

Green

Power (Watts)

0.1W, 1/10W

Pitch

0.197 (5.00mm)

Termination Style

PC Pins

Wire Gauge

a measurement of?wire?diameter.?This determines the amount of electric current the wire can safely carry, as well as its electrical resistance and weight.

14-26 AWG

Voltage

300 V

Number of Levels

1

Current

8 A

Positions Per Level

10

Adjustment Type

Side Adjustment

Number of Turns

1

Mating Orientation

Vertical with Board

Wire Termination

a piece of electrical equipment that's attached to either end of an electrical wire.

Screw - Leaf Spring, Wire Guard

Screw Thread

M2.5

Features

Interlocking (Side)