AMI Semiconductor NLAS44599MN

Package / Case

Axial

Supplier Device Package

Axial

Package

Bulk

Base Product Number

RLR32

Mfr

Vishay Dale

Product Status

Active

Lead Free Status / RoHS Status

Contains lead / RoHS non-compliant

Other Names

NLAS44599MNOS

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-65°C ~ 150°C

Series

Military, MIL-PRF-39017/03, RLR32

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

Size / Dimension

0.190 Dia x 0.562 L (4.83mm x 14.27mm)

Tolerance

±1%

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

2

Temperature Coefficient

The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

±100ppm/°C

Resistance

11 kOhms

Composition

Metal Film

Power (Watts)

1W

Base Part Number

NLAS44599

Failure Rate

the frequency with which an engineered system or component fails, expressed in failures per unit of time. It is usually denoted by the Greek letter λ (lambda) and is often used in reliability engineering.

M (1%)

Number of Circuits

2

-3db Bandwidth

175MHz

On-State Resistance (Max)

25 Ohm

Multiplexer/Demultiplexer Circuit

2:2

Current - Leakage (IS(off)) (Max)

10µA

Channel Capacitance (CS(off), CD(off))

10pF, 10pF

Switch Circuit

establishes connections between links, on demand and as available, in order to establish an end-to-end circuit between devices.

DPDT

Switch Time (Ton, Toff) (Max)

14ns, 5ns

Charge Injection

A Charge injection in analog switches and multiplexers is a level change caused by stray capacitance associated with the NMOS and PMOS transistors that make up the analog switch.

3pC

Channel-to-Channel Matching (ΔRon)

-

Crosstalk

-90dB @ 100kHz

Voltage - Supply, Single (V+)

2 V ~ 5.5 V

Voltage - Supply, Dual (V±)

-

Features

Military, Moisture Resistant, Weldable

Height Seated (Max)

-