AMP 1825130-2

Mounting Type

Surface Mount

Package / Case

4-SMD, No Lead

Package

Bulk

Mfr

Suntsu Electronics, Inc.

Product Status

Active

Base Product Number

1825130

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-10°C ~ 60°C

Series

SXT224

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tray

Size / Dimension

0.098 L x 0.079 W (2.50mm x 2.00mm)

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Termination

Solder

Connector Type

Header Strip

Type

MHz Crystal

Number of Positions

14

Color

--

Number of Rows

2

Contact Type

Forked

Pitch

0.100 (2.54mm)

Frequency

13.56 MHz

Frequency Stability

the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

±20ppm

Contact Finish

Tin

ESR (Equivalent Series Resistance)

120 Ohms

Row Spacing

the space needed between rows to allow room for people or farm equipment to get through.

0.300 (7.62mm)

Load Capacitance

the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

16pF

Operating Mode

A phase of operation during the operation and maintenance stages of the life cycle of a facility.

Fundamental

Frequency Tolerance

the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

±20ppm

Features

--

Height Seated (Max)

0.026 (0.65mm)

Contact Finish Thickness

--

Ratings

-