Analog Devices MAX2504ELM-D

Package / Case

0402 (1005 Metric)

Supplier Device Package

0402

Base Product Number

RN73R1E

Mfr

KOA Speer Electronics, Inc.

Product Status

Active

Package

Tape & Reel (TR);Cut Tape (CT);Digi-Reel®;

Series

RN73R

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C ~ 155°C

Size / Dimension

0.039 L x 0.020 W (1.00mm x 0.50mm)

Tolerance

±0.5%

Number of Terminations

2

Temperature Coefficient

The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

±25ppm/°C

Resistance

569 Ohms

Composition

Thin Film

Applications

Cellular

Power (Watts)

0.063W, 1/16W

Voltage - Supply

2.7V ~ 3.3V

Frequency

-

Failure Rate

the frequency with which an engineered system or component fails, expressed in failures per unit of time. It is usually denoted by the Greek letter λ (lambda) and is often used in reliability engineering.

-

Memory Size

The memory capacity is the amount of data a device can store at any given time in its memory.

-

Data Interface

A Data Interface in EDQ is a template of a set of attributes representing a given entity, used to create processes that read from, or write to, interfaces rather than directly from or to sources or targets of data.

PCB, Surface Mount

Power - Output

-

Data Rate (Max)

-

Current - Transmitting

-

Modulation or Protocol

Modulation is the process of converting data into radio waves by adding information to an electronic or optical carrier signal. A carrier signal is one with a steady waveform -- constant height, or amplitude, and frequency.

CDMA

Antenna Connector

An antenna connector is a radio frequency connector that is located at the termination of an antenna. Its attachment to the antenna provides a conduit for the transmission of radio frequency signals with signal loss, discontinuity, and impedance mismatches kept to a strict minimum.

PCB, Surface Mount

Features

Automotive AEC-Q200, Moisture Resistant

Height Seated (Max)

0.016 (0.40mm)

Ratings

AEC-Q200