Analog Devices Inc. AD584JNZ

Lifecycle Status

PRODUCTION (Last Updated: 3 weeks ago)

Factory Lead Time

8 Weeks

Mounting Type

Through Hole

Package / Case

8-DIP (0.300, 7.62mm)

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

NO

Number of Pins

8

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

0°C~70°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

Tolerance

±0.3%

JESD-609 Code

e3

Pbfree Code

no

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

8

ECCN Code

EAR99

Temperature Coefficient

The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

30ppm/°C

Terminal Finish

Matte Tin (Sn)

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

600mW

Terminal Position

DUAL

Number of Functions

1

Supply Voltage

15V

Terminal Pitch

The center distance from one pole to the next.

2.54mm

Base Part Number

AD584

Pin Count

a count of all of the component leads (or pins)

8

Number of Outputs

3

Output Voltage

10V

Output Type

Programmable

Max Output Current

The maximum current that can be supplied to the load.

10mA

Supply Voltage-Max (Vsup)

30V

Number of Channels

1

Trim/Adjustable Output

YES

Analog IC - Other Type

THREE TERMINAL VOLTAGE REFERENCE

Operating Supply Current

1mA

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

750μA

Max Supply Current

1mA

Quiescent Current

The quiescent current is defined as the current level in the amplifier when it is producing an output of zero.

1mA

Voltage - Output (Min/Fixed)

2.5V 5V 7.5V 10V

Min Input Voltage

4.5V

Max Input Voltage

40V

Reference Voltage

A voltage reference is an electronic device that ideally produces a fixed (constant) voltage irrespective of the loading on the device, power supply variations, temperature changes, and the passage of time. Voltage references are used in power supplies, analog-to-digital converters, digital-to-analog converters, and other measurement and control systems. Voltage references vary widely in performance; a regulator for a computer power supply may only hold its value to within a few percent of the nominal value, whereas laboratory voltage standards have precisions and stability measured in parts per million.

2.5V

Reference Type

a code object that is not stored directly where it is created, but that acts as a kind of pointer to a value stored elsewhere.

Series

Forward Voltage

the amount of voltage needed to get current to flow across a diode.

10V

Temp Coef of Voltage-Max

30 ppm/°C

Noise - 0.1Hz to 10Hz

50μVp-p

Height

3.3mm

Length

9.91mm

Width

6.35mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Contains Lead