AD608AR
16-SOIC (0.154, 3.90mm Width)
8601580-AD608AR
IC MIXER 500MHZ DOWN CONV 16SOIC
Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.
Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.
Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.
The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.
The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.
Occurring at or forming the end of a series, succession, or the like; closing; concluding.
a count of all of the component leads (or pins)
The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.
Temperature grades represent a tire's resistance to heat and its ability to dissipate heat when tested under controlled laboratory test conditions.
Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.
the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.
The rate of oscillation of electromagnetic radio waves in the range of 3 kHz to 3 GHz, as well as the alternating currents carrying the radio signals.
Noise figure (NF) and noise factor (F) are measures of degradation of the signal-to-noise ratio (SNR), caused by components in a signal chain.
a device that combines two or more electrical or electronic signals into one or two composite output signals. There are two basic circuits that both use the term mixer, but they are very different types of circuits: additive mixers and multiplicative mixers. Additive mixers are also known as analog adders to distinguish from the related digital adder circuits.
Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.
RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.