Analog Devices Inc. ADG936BRUZ-R

Lifecycle Status

PRODUCTION (Last Updated: 1 week ago)

Factory Lead Time

8 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Tin

Mount

Surface Mount

Package / Case

20-TSSOP (0.173, 4.40mm Width)

Number of Pins

20

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

10 ns

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

JESD-609 Code

e3

Pbfree Code

no

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

20

ECCN Code

EAR99

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

2.75μW

Voltage - Supply

1.65V~2.75V

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

260

Number of Functions

2

Supply Voltage

2.5V

Terminal Pitch

The center distance from one pole to the next.

0.65mm

Frequency

4GHz

Time@Peak Reflow Temperature-Max (s)

30

Base Part Number

ADG936

Pin Count

a count of all of the component leads (or pins)

20

Qualification Status

An indicator of formal certification of qualifications.

Not Qualified

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

2.75V

Circuit

2 x SPDT

Supply Voltage-Min (Vsup)

1.65V

Number of Channels

1

Interface

Parallel

Test Frequency

a statistical procedure for assessing data that contain counts or the numbers of occurrences of various categories or classes.

1GHz

Impedance

In electrical engineering, impedance is the opposition to alternating current presented by the combined effect of resistance and reactance in a circuit.

50Ohm

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

2.75μW

Number of Bits

2

Throw Configuration

SPDT

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

11 ns

Topology

Reflective

-3db Bandwidth

4 GHz

Frequency Range

A continuous range or spectrum of frequencies that extends from one limiting frequency to another.

DC~2GHz

Insertion Loss

the loss of signal power resulting from the insertion of a device in a transmission line or optical fiber and is usually expressed in decibels (dB).

0.9dB

Off-state Isolation-Nom

36 dB

Isolation

36dB

Insertion Loss (dB)

0.4 dB

RF Type

The rate of oscillation of electromagnetic radio waves in the range of 3 kHz to 3 GHz, as well as the alternating currents carrying the radio signals.

General Purpose

Switch-on Time-Max

14ns

Switch-off Time-Max

13ns

P1dB

16dBm

IIP3

32dBm

Height

1.05mm

Length

6.6mm

Width

4.5mm

REACH SVHC

No SVHC

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Contains Lead