PM20S-020-124

Analog Devices Inc./Maxim Integrated PM20S-020-124

Part No:

PM20S-020-124

Datasheet:

-

Package:

-

AINNX NO:

28815244-PM20S-020-124

Description:

STEPPER MOTORS PERMANENT MAGNET

Products specifications
  • Weight
    -
  • Mounting Hole Spacing

    The holes in the mounting brackets are spaced at 1 U (1.75 in. or 4.45 cm), so the router can be mounted in any rack that provides holes spaced at that distance.

    0.984" (25.00mm)
  • Voltage Rated

    RATED voltage is the voltage on the nameplate - the "design point" for maximum power throughput and safe thermal operation.

    1.5VDC
  • Product Status
    Obsolete
  • Package
    Bulk
  • Mfr
    Analog Devices Inc./Maxim Integrated
  • CoilResistance
    2 Ohms
  • Series
    -
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    60°C
  • Size / Dimension
    Round - 0.787" Dia (20.00mm)
  • Type
    Permanent Magnet
  • Current Rating (Amps)
    750 mA
  • Termination Style
    Wire Leads with Connector
  • Approval Agency
    -
  • Accuracy
    -
  • Coil Type

    There are 2 different types of 'coil'; one has copper on it (IUD) and the other contains hormone (Mirena IUS). Both are over 99% effective at protecting against pregnancy.

    Bipolar
  • Step Angle

    the angle at which the rotor of a stepper motor moves when one pulse is applied to the input of the stator.

    18°
  • Steps per Revolution
    200
  • Torque - Holding (oz-in / mNm)
    1.104 / 7.8
  • Features
    -
  • NEMA Frame Size

    NEMA (National Electrical Manufacturers Association) frame size refers to mounting only and has no direct bearing on the motor body diameter. In any standard frame number designation there are either two or three numbers.

    8
  • Rotor Inertia
    -
  • Diameter - Shaft
    0.059" (1.50mm)
  • Length - Shaft and Bearing
    0.256" (6.50mm)
0 Similar Products Remaining