PC-0148-100-0

Block PC-0148-100-0

Part No:

PC-0148-100-0

Manufacturer:

Block

Datasheet:

-

Package:

-

AINNX NO:

39734092-PC-0148-100-0

Description:

Block Power Supplies, PC 1AC Series

Products specifications
  • Mounting Type
    Panel Mount
  • Mounting Feature

    a process by which the operating system makes files and directories on a storage device (such as hard drive, CD-ROM, or network share) available for users to access via the computer's file system.

    Flange
  • Dielectric Material

    a substance that is a poor conductor of electricity, but an efficient supporter of electrostatic field s.

    Polytetrafluoroethylene (PTFE)
  • Weight
    1600g
  • Body Material
    Brass
  • Center Contact Plating
    Gold
  • Center Contact Material
    Phosphor Bronze
  • Voltage, Rating
    500 V
  • Package
    Bulk
  • Base Product Number
    1125
  • Mfr
    Amphenol RF
  • Product Status
    Active
  • Frequency-Max
    1 GHz
  • Manufacturer Part Number
    PC-0148-100-0
  • Approvals
    cULus, cURus, GL
  • Input Frequency

    The Input Frequency refers to the frequency that mobiles and portables transmit on to access a Repeater.

    44-66 Hz
  • Manufacturer
    Block
  • Power Factor Correction
    No
  • Mounting
    DIN Rail
  • No. of outputs
    1x
  • Dim
    (L x W x H) 159 x 95 x 127 mm
  • Connections
    Push-in connector
  • Manufacturer part #
    PC-0148-100-0
  • Input voltage (max.)
    264V AC
  • Max. output current
    10A
  • Inputs
    1
  • Output voltage (max.)
    56V DC
  • Min. temperature
    -25°C
  • Content
    1pc(s)
  • Output voltage (min.)
    40V DC
  • Max. temperature
    +70°C
  • Output current (max.) - rounded
    10A
  • Min. input voltage
    85V AC
  • Output voltage (nominal)
    48V DC
  • RoHS
    Compliant
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -40°C ~ 155°C
  • Series
    -
  • Connector Type
    Jack, Female Socket
  • Type
    PC-0148-100-0
  • Fastening Type

    There are 5 Main Types of Fastening Type: Screws, Nails, Bolts, Anchors, Rivets.

    Bayonet Lock
  • Ingress Protection

    Ingress Protection rating (or just IP rating), is an international standard (IEC 60529) used to rate the degree of protection or sealing effectiveness in electrical enclosures against intrusion of objects, water, dust or accidental contact. It corresponds to the European standard EN 60529.

    -
  • Number of Outputs
    1
  • Efficiency
    93%
  • Housing Color
    Silver
  • Impedance

    In electrical engineering, impedance is the opposition to alternating current presented by the combined effect of resistance and reactance in a circuit.

    50Ohm
  • Connector Style
    BNC
  • Number of Ports

    A port is identified for each transport protocol and address combination by a 16-bit unsigned number,.

    1
  • Output Current

    The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

    10 A
  • Output Power

    That power available at a specified output of a device under specified conditions of operation.

    480 W
  • Mating Cycles

    to the number of a times a physical connector can “mate” or connect to it's counterpart.

    500
  • Contact Termination
    Crimp
  • Includes
    4 pcs - 1 Connector, 1 Contact, 1 Ferrule, 1 Sleeve
  • Insertion Loss

    the loss of signal power resulting from the insertion of a device in a transmission line or optical fiber and is usually expressed in decibels (dB).

    0.2dB
  • Body Finish

    Body Finish Paint is a very high-quality and fast drying 1-component acrylic lacquer, specially developed to spray new or repaired sheet metal as well as parts of machines giving them an OEM finish.

    Nickel
  • Cable Group

    A cable group describes the group of cables that are compatible with a particular contact.

    RG-174, 188A, 316
  • Shield Termination
    Crimp
  • Power
    480 W
  • Overload Protection

    Overload protection is a protection against a running overcurrent that would cause overheating of the protected equipment. Hence, an overload is also type of overcurrent. Overload protection typically operates on an inverse time curve where the tripping time becomes less as the current increases.

    No
  • Features
    -
  • Nominal Input Voltage (AC)
    120 VAC, 240 VAC
  • Width
    95mm
  • Height
    127mm
  • Length
    159mm
0 Similar Products Remaining