All Products
Bourns M22759/16-18-9
M22759/16-18-9
MELF, 0204
35063644-M22759/16-18-9
Hook-up Wire 18AWG 1.85mm Tin Plated Copper 600VAC
- Package / CaseMELF, 0204
- MountWire
- Supplier Device Package0204
- Conductor Material
A conductor is a material which contains movable electric charges. In metallic conductors, such as copper or aluminum, the movable charged particles are electrons, though in other cases they can be ions or other positively charged species.
COPPER - PackageBulk
- MfrStackpole Electronics Inc
- Product StatusActive
- Voltage Rating (DC)600 V
- RoHSNon-Compliant
- Insulation MaterialsETFE
- Insulator MaterialETFE
- Operating Temperature-Min-55 °C
- Operating Temperature-Max150 °C
- Risk Rank5.55
- Ihs ManufacturerCARLISLE INTERCONNECT TECHNOLOGIES
- Part Life Cycle CodeContact Manufacturer
- ManufacturerCarlisle Interconnect Components
- ApprovalsMIL
- Manufacturer Part NumberM22759/16-18-9
- Operating Temperature
The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.
-55°C ~ 155°C - SeriesMLFM
- Size / Dimension0.055 Dia x 0.138 L (1.40mm x 3.50mm)
- Tolerance±0.1%
- Number of Terminations2
- Temperature Coefficient
The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.
±25ppm/°C - Resistance10 Ohms
- CompositionThin Film
- ApplicationsAEROSPACE
- Power (Watts)0.4W
- Additional Feature
Any Feature, including a modified Existing Feature, that is not an Existing Feature.
STANDARD: MIL-W-22759/16, APPLICATION: LIGHT WEIGHT, TIGHT DIAMETER TOLERANCES AND ENHANCED MECHANICAL TOUGHNESS - ShieldingNO
- ConstructionSTRANDED
- Reach Compliance Codeunknown
- Number of Conductors1
- Failure Rate
the frequency with which an engineered system or component fails, expressed in failures per unit of time. It is usually denoted by the Greek letter λ (lambda) and is often used in reliability engineering.
- - Wire Gauge
a measurement of?wire?diameter.?This determines the amount of electric current the wire can safely carry, as well as its electrical resistance and weight.
18 AWG - Connector Support TypeWIRE AND CABLE
- Wire/Cable Gauge18 AWG
- Rated Voltage600 V
- Stranding19X30
- Wire and Cable NameFLEXIBLE CORD AND FIXTURE WIRE
- Conductor FinishTIN
- FeaturesPulse Withstanding
- Height Seated (Max)-
- Diameter1.85 mm
- Ratings-
M22759/11-20-0
BournsWire and CableM16878/5-BGE-9
BournsM16878/5-BGE-9M22759/18-18-7
BournsSingle Conductor CablesM27500-20RC1S09
BournsM27500-20RC1S09 is a 1 conductor cable with SILVER COATED Cu ROUND shielding and FEP jacket with an M22759/11 inner conductorM22759/11-18-3
BournsWire and CableM22759/8-18-9
BournsM22759/8-18-9 is a Nickel Plated Copper, Mineral Filled Extruded PTFE Jacketed Wire, 260°C. QPL material with certifications and test reports.M22759/16-18-9
BournsHook-up Wire 18AWG 1.85mm Tin Plated Copper 600VACM16878/4-BEE-0
BournsWire and CableM16878/4-BLE-1
BournsM16878/4-BLE-1 is a 12 AWG Silver plated copper conductor general purpose electronic hook-up wire with a single layer of polytetrafluoroethylene (PTFE) insulation. This wire is resistant to thermal aging, solder iron damage, open flames, moisture, solvents, grease, ozone and other chemicals. Commonly used in high temperature internal electronic applications, these wires have low power loss and are ideal for applications requiring high frequency. This specification is currently referred to as ...M16878/4-BFE-5
BournsM16878/4-BFE-5 is a 22 AWG Silver plated copper conductor general purpose electronic hook-up wire with a single layer of polytetrafluoroethylene (PTFE) insulation. This wire is resistant to thermal aging, solder iron damage, open flames, moisture, solvents, grease, ozone and other chemicals. Commonly used in high temperature internal electronic applications, these wires have low power loss and are ideal for applications requiring high frequency. This specification is currently referred to as ...