Bourns Inc. 1530-1D

Factory Lead Time

8 Weeks

Mount

DIN Rail

Mounting Type

DIN Rail

Terminal Shape

FLAT

Housing Material

Plastic

Number of Elements

1

Operating Temperature (Max.)

125°C

Operating Temperature (Min.)

-55°C

Series

1530-1

Published

2015

Tolerance

0.5%

JESD-609 Code

e3

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

8

Termination

Lug

ECCN Code

EAR99

Temperature Coefficient

The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

25 ppm/°C

Type

Surge Protection Module

Terminal Finish

Tin (Sn)

HTS Code

HTS (Harmonized Tariff Schedule) codes are product classification codes between 8-1 digits. The first six digits are an HS code, and the countries of import assign the subsequent digits to provide additional classification. U.S. HTS codes are 1 digits and are administered by the U.S. International Trade Commission.

8533.21.00.10

Voltage - Rated DC

57V

Number of Functions

4

Reach Compliance Code

not_compliant

Rated Power Dissipation (P)

1.09W

Approval Agency

CSA, IEC, IEEE, UL

Working Voltage

50V

Rated Temperature

70°C

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

1A

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

1 μs

Element Power Dissipation

0.2W

First Element Resistance

5300Ohm

Overload Protection

Overload protection is a protection against a running overcurrent that would cause overheating of the protected equipment. Hence, an overload is also type of overcurrent. Overload protection typically operates on an inverse time curve where the tripping time becomes less as the current increases.

Fuse Holder

AC Outlets

None

Temperature Coefficient Tracking

5 ppm/°C

Length

65.1mm

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

Non-RoHS Compliant

Ratings

IP20