Bourns Inc. 4116R-1-221LF

Factory Lead Time

6 Weeks

Mount

Through Hole

Mounting Type

Through Hole

Package / Case

16-DIP (0.300, 7.62mm)

Number of Pins

16

Supplier Device Package

16-DIP

Material

Copper

Number of Elements

8

Voltage Rated

RATED voltage is the voltage on the nameplate - the "design point" for maximum power throughput and safe thermal operation.

100V

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C~125°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

Series

4100R

Published

2005

Size / Dimension

0.865Lx0.300W 21.97mmx7.62mm

Tolerance

±2%

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

16

Termination

Pin

Temperature Coefficient

The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

±100ppm/°C

Resistance

220Ohm

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

125°C

Min Operating Temperature

-55°C

Composition

Thick Film

Power Rating

2.25W

Voltage - Rated DC

100V

Terminal Pitch

The center distance from one pole to the next.

2.54mm

Depth

7.87mm

Base Part Number

4116R

Military Standard

Not

Voltage - Rated AC

100V

Lead Pitch

2.54mm

Number of Contacts

16

Lead Length

3.18mm

Working Voltage

100V

Insulation Resistance

The measurement of insulation resistance is carried out by means of a megohmmeter – high resistance range ohmmeter. A general rule-of-thumb is 10 Megohm or more.

10MOhm

Number of Resistors

8

Circuit Type

There are 5 Main Types of Electric Circuit – Close Circuit, Open Circuit, Short Circuit, Series Circuit and Parallel Circuit.

Isolated

Power Per Element

250mW

Resistor-Ratio-Drift

50ppm/°C

Height

4.699mm

Height Seated (Max)

0.185 4.69mm

Length

21.97mm

Width

7.62mm

Thickness

-177.8μm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free