Broadcom Limited HCPL-0631-500E

Factory Lead Time

17 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Tin

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

8-SOIC (0.154, 3.90mm Width)

Number of Pins

8

Number of Elements

2

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Published

2005

JESD-609 Code

e3

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

ECCN Code

EAR99

Additional Feature

Any Feature, including a modified Existing Feature, that is not an Existing Feature.

TTL COMPATIBLE, UL RECOGNIZED

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

60mW

Voltage - Supply

4.5V~5.5V

Supply Voltage

5V

Voltage - Isolation

3750Vrms

Output Voltage

7V

Output Type

Open Collector, Schottky Clamped

Number of Channels

2

Voltage

5V

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

60mW

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

50mA

Voltage - Forward (Vf) (Typ)

1.5V

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

75 ns

Input Type

DC

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

75 ns

Optoelectronic Device Type

LOGIC IC OUTPUT OPTOCOUPLER

Forward Current

Current which flows upon application of forward voltage.

15mA

Max Output Voltage

The maximum output voltage refers to the dynamic area beyond which the output is saturated in the positive or negative direction, and is limited according to the load resistance value.

7V

Response Time

the time taken for a circuit or measuring device, when subjected to a change in input signal, to change its state by a specified fraction of its total response to that change.

1e-7 ns

Data Rate

Data Rate is defined as the amount of data transmitted during a specified time period over a network. It is the speed at which data is transferred from one device to another or between a peripheral device and the computer. It is generally measured in Mega bits per second(Mbps) or Mega bytes per second(MBps).

10MBd

Direction

Unidirectional

Output Current per Channel

50mA

Rise Time

In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

24ns

Fall Time (Typ)

10 ns

Max Collector Current

50mA

Rise / Fall Time (Typ)

24ns 10ns

Reverse Breakdown Voltage

5V

Input Current

15mA

On-State Current-Max

0.05A

Propagation Delay tpLH / tpHL (Max)

100ns, 100ns

Common Mode Transient Immunity (Min)

10kV/μs

Inputs - Side 1/Side 2

2/0

Reverse Voltage (DC)

5V

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free