Broadcom Limited HCPL-4100-000E

Factory Lead Time

22 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Tin

Mount

Through Hole

Mounting Type

Through Hole

Package / Case

8-DIP (0.300, 7.62mm)

Number of Pins

8

Collector-Emitter Breakdown Voltage

27V

Number of Elements

1

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

Published

2010

JESD-609 Code

e3

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

ECCN Code

EAR99

Type

Current Loop Transmitter

Additional Feature

Any Feature, including a modified Existing Feature, that is not an Existing Feature.

TTL COMPATIBLE, UL RECOGNIZED

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

360mW

Voltage - Supply

4.5V~20V

Supply Voltage

5V

Approval Agency

CSA, UR

Voltage - Isolation

3750Vrms

Output Voltage

27V

Max Output Current

The maximum current that can be supplied to the load.

30mA

Configuration

SINGLE

Number of Channels

1

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

360mW

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

30mA

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

1 μs

Input Type

Logic

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

500 ns

Response Time

the time taken for a circuit or measuring device, when subjected to a change in input signal, to change its state by a specified fraction of its total response to that change.

1.6e-8 ns

Data Rate

Data Rate is defined as the amount of data transmitted during a specified time period over a network. It is the speed at which data is transferred from one device to another or between a peripheral device and the computer. It is generally measured in Mega bits per second(Mbps) or Mega bytes per second(MBps).

24 kbps

Direction

Unidirectional

Output Current per Channel

30mA

Rise Time

In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

16ns

Forward Voltage

the amount of voltage needed to get current to flow across a diode.

20V

Fall Time (Typ)

23 ns

Rise / Fall Time (Typ)

16ns 23ns

Forward Current-Max

0.00032A

Max Input Current

250μA

Input Current

13mA

On-State Current-Max

0.024A

Propagation Delay tpLH / tpHL (Max)

1.6μs, 1μs

Common Mode Transient Immunity (Min)

1kV/μs

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free