ADS7810U/1K

Burr Brown ADS7810U/1K

Part No:

ADS7810U/1K

Manufacturer:

Burr Brown

Datasheet:

-

Package:

HC-49/US

AINNX NO:

39497070-ADS7810U/1K

Description:

IC ADC 12BIT SAR 28SOIC

Products specifications
  • Mounting Type
    Surface Mount
  • Package / Case
    HC-49/US
  • Supplier Device Package
    28-SOIC
  • Package
    Bulk
  • Mfr
    Suntsu Electronics, Inc.
  • Product Status
    Active
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -10°C ~ 60°C
  • Series
    SXTHM2
  • Size / Dimension
    0.524 L x 0.197 W (13.30mm x 5.00mm)
  • Type
    MHz Crystal
  • Frequency
    24.576 MHz
  • Frequency Stability

    the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

    ±50ppm
  • ESR (Equivalent Series Resistance)
    30 Ohms
  • Configuration
    S/H-ADC
  • Load Capacitance

    the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

    20pF
  • Operating Mode

    A phase of operation during the operation and maintenance stages of the life cycle of a facility.

    Fundamental
  • Number of Bits
    12
  • Frequency Tolerance

    the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

    ±50ppm
  • Input Type
    Single Ended
  • Architecture
    SAR
  • Number of Inputs
    1
  • Reference Type

    a code object that is not stored directly where it is created, but that acts as a kind of pointer to a value stored elsewhere.

    External, Internal
  • Data Interface

    A Data Interface in EDQ is a template of a set of attributes representing a given entity, used to create processes that read from, or write to, interfaces rather than directly from or to sources or targets of data.

    Parallel
  • Voltage - Supply, Analog
    ±5V
  • Voltage - Supply, Digital
    5V
  • Sampling Rate (Per Second)
    800k
  • Number of A/D Converters
    1
  • Ratio - S/H:ADC
    1:1
  • Features
    -
  • Height Seated (Max)
    0.177 (4.50mm)
0 Similar Products Remaining