RGC1A60D20KGU
SSR with Integrated Heat Sink
50463-RGC1A60D20KGU
SOLID STATE CONTACTOR, 3PH, 600VAC, 23A, DIN RAIL
RATED voltage is the voltage on the nameplate - the "design point" for maximum power throughput and safe thermal operation.
Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.
Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.
The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.
Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.
The maximum current that can be supplied to the load.
The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.
In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.
The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.
Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.
The maximum output voltage refers to the dynamic area beyond which the output is saturated in the positive or negative direction, and is limited according to the load resistance value.
The current rating of a contact is defined as the current level that creates a certain temperature rise of the contact spring — usually 20°C or 30°C. Both electrical and thermal factors govern the heat created by the current.
Isolation voltage refers to a test of the ability of an insulator to minimize the flow of electric current with a high applied voltage.
RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.