CEL PS9117A-AX

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

6-SOIC (0.173, 4.40mm Width), 5 Leads

Number of Pins

5

Supplier Device Package

5-SO

Number of Elements

1

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Bulk

Series

NEPOC

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Discontinued

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

85°C

Min Operating Temperature

-40°C

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

40mW

Voltage - Supply

4.5V~5.5V

Voltage - Isolation

3750Vrms

Output Type

Open Collector

Max Output Current

The maximum current that can be supplied to the load.

25mA

Number of Channels

1

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

40mW

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

25mA

Voltage - Forward (Vf) (Typ)

1.65V

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

75 ns

Input Type

DC

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

75 ns

Forward Current

Current which flows upon application of forward voltage.

12.5mA

Max Output Voltage

The maximum output voltage refers to the dynamic area beyond which the output is saturated in the positive or negative direction, and is limited according to the load resistance value.

7V

Data Rate

Data Rate is defined as the amount of data transmitted during a specified time period over a network. It is the speed at which data is transferred from one device to another or between a peripheral device and the computer. It is generally measured in Mega bits per second(Mbps) or Mega bytes per second(MBps).

10Mbps

Direction

Unidirectional

Output Current per Channel

25mA

Forward Voltage

the amount of voltage needed to get current to flow across a diode.

1.65V

Fall Time (Typ)

5 ns

Rise / Fall Time (Typ)

20ns 5ns

Reverse Breakdown Voltage

5V

Current - DC Forward (If) (Max)

30mA

Propagation Delay tpLH / tpHL (Max)

75ns, 75ns

Common Mode Transient Immunity (Min)

15kV/μs

Inputs - Side 1/Side 2

1/0

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free