CTS Electrocomponents 45T3

Factory Lead Time

6 Weeks

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

YES

Mounting Feature

a process by which the operating system makes files and directories on a storage device (such as hard drive, CD-ROM, or network share) available for users to access via the computer's file system.

SURFACE MOUNT

Operating Temperature (Min.)

-40°C

Operating Temperature (Max.)

85°C

Series

450

JESD-609 Code

e4

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Terminal Finish

Gold (Au) - with Nickel (Ni) barrier

Additional Feature

Any Feature, including a modified Existing Feature, that is not an Existing Feature.

AT-CUT; TAPE AND REEL

HTS Code

HTS (Harmonized Tariff Schedule) codes are product classification codes between 8-1 digits. The first six digits are an HS code, and the countries of import assign the subsequent digits to provide additional classification. U.S. HTS codes are 1 digits and are administered by the U.S. International Trade Commission.

8541.60.00.60

Frequency Stability

the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

0.003%

Physical Dimension

L5.0XB3.2XH1.3 (mm)/L0.197XB0.126XH0.051 (inch)

Operating Frequency

Operating frequency is the frequency at which the communications are being made with the total bandwidth occupied by the carrier signal with modulation. Usually bandwidth of the antenna will be wider than the bandwidth of the signal so that more than one center frequency the antenna can be put in to effective use.

24.5MHz

Load Capacitance

the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

10pF

Accessory Type

Nut

Frequency Tolerance

the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

30ppm

Drive Level

10 μW

Aging

5 PPM/YEAR

Crystal/Resonator Type

PARALLEL - 3RD OVERTONE

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

RoHS Compliant