0188-0104L

Dinkle 0188-0104L

Part No:

0188-0104L

Manufacturer:

Dinkle

Datasheet:

-

Package:

4-SMD, No Lead

AINNX NO:

40117792-0188-0104L

Description:

TERM BLK 4POS 90DEG 2.50MM PCB

Products specifications
  • Mounting Type
    Surface Mount
  • Package / Case
    4-SMD, No Lead
  • Housing Material
    Thermoplastic
  • Contact Material - Plating
    Copper Alloy - Tin Plated
  • Clamp Material - Plating
    -
  • Screw Material - Plating
    -
  • Package
    Bulk
  • Mfr
    Suntsu Electronics, Inc.
  • Product Status
    Active
  • Torque-Screw
    -
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    0°C ~ 70°C
  • Series
    SXT224
  • Size / Dimension
    0.098 L x 0.079 W (2.50mm x 2.00mm)
  • Type
    MHz Crystal
  • Color
    Black
  • Pitch
    0.098 (2.50mm)
  • Frequency
    13 MHz
  • Frequency Stability

    the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

    ±25ppm
  • ESR (Equivalent Series Resistance)
    120 Ohms
  • Wire Gauge

    a measurement of?wire?diameter.?This determines the amount of electric current the wire can safely carry, as well as its electrical resistance and weight.

    18-26 AWG
  • Voltage
    150 V
  • Load Capacitance

    the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

    17pF
  • Number of Levels
    1
  • Current
    5 A
  • Operating Mode

    A phase of operation during the operation and maintenance stages of the life cycle of a facility.

    Fundamental
  • Frequency Tolerance

    the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

    ±20ppm
  • Positions Per Level
    4
  • Mating Orientation
    Horizontal with Board
  • Wire Termination

    a piece of electrical equipment that's attached to either end of an electrical wire.

    Screwless - Leg Spring, Push-In Spring
  • Screw Thread
    -
  • Features
    Push Button Actuated
  • Height Seated (Max)
    0.026 (0.65mm)
  • Ratings
    -
0 Similar Products Remaining