Diodes Incorporated BZX84C5V1-7-F

Factory Lead Time

19 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Tin

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

TO-236-3, SC-59, SOT-23-3

Number of Pins

3

Weight

7.994566mg

Diode Element Material

SILICON

Number of Elements

1

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-65°C~150°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Series

Automotive, AEC-Q101

Published

2010

Tolerance

±6%

JESD-609 Code

e3

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

3

Termination

SMD/SMT

ECCN Code

EAR99

Additional Feature

Any Feature, including a modified Existing Feature, that is not an Existing Feature.

HIGH RELIABILITY

HTS Code

HTS (Harmonized Tariff Schedule) codes are product classification codes between 8-1 digits. The first six digits are an HS code, and the countries of import assign the subsequent digits to provide additional classification. U.S. HTS codes are 1 digits and are administered by the U.S. International Trade Commission.

8541.10.00.50

Power Rating

350mW

Voltage - Rated DC

5.1V

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

350mW

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

260

Time@Peak Reflow Temperature-Max (s)

40

Base Part Number

BZX84C5V1

Pin Count

a count of all of the component leads (or pins)

3

Working Voltage

5.1V

Polarity

UNIDIRECTIONAL

Impedance

In electrical engineering, impedance is the opposition to alternating current presented by the combined effect of resistance and reactance in a circuit.

60Ohm

Element Configuration

The distribution of electrons of an atom or molecule (or other physical structure) in atomic or molecular orbitals.

Single

Diode Type

ZENER DIODE

Current - Reverse Leakage @ Vr

2μA @ 2V

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

350mW

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

50mA

Voltage - Forward (Vf) (Max) @ If

900mV @ 10mA

Power - Max

300mW

Max Reverse Leakage Current

2μA

Impedance-Max

60Ohm

Test Current

5mA

Reference Voltage

A voltage reference is an electronic device that ideally produces a fixed (constant) voltage irrespective of the loading on the device, power supply variations, temperature changes, and the passage of time. Voltage references are used in power supplies, analog-to-digital converters, digital-to-analog converters, and other measurement and control systems. Voltage references vary widely in performance; a regulator for a computer power supply may only hold its value to within a few percent of the nominal value, whereas laboratory voltage standards have precisions and stability measured in parts per million.

5.1V

Forward Voltage

the amount of voltage needed to get current to flow across a diode.

900mV

Zener Voltage

5.1V

Voltage Tol-Max

5.88%

Peak Reverse Current

The maximum voltage that a diode can withstand in the reverse direction without breaking down or avalanching.If this voltage is exceeded the diode may be destroyed. Diodes must have a peak inverse voltage rating that is higher than the maximum voltage that will be applied to them in a given application.

2μA

Voltage Tolerance

The voltage tolerance level for the electrical auxiliaries is defined by the standard. The maximum and minimum nominal voltages are defined by the tolerance level.

6%

Reverse Voltage

the voltage drop across the diode if the voltage at the cathode is more positive than the voltage at the anode

2V

ESD Protection

No

Zener Current

Zener/Breakdown Voltage – The Zener or the reverse breakdown voltage?ranges from 2.4 V to 2 V, sometimes it can go up to 1 kV while the maximum for the surface-mounted device is 47 V. ... It is given by the product of the voltage of the diode and the current flowing through it.

5mA

Height

1.1mm

Length

2.9mm

Width

1.3mm

REACH SVHC

No SVHC

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free