Diodes Incorporated QSBT40-7

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

6-TSSOP, SC-88, SOT-363

Number of Pins

6

Weight

6.010099mg

Reverse Stand-off Voltage

30V

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C~125°C TJ

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Published

2006

JESD-609 Code

e0

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Discontinued

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

6

Termination

SMD/SMT

ECCN Code

EAR99

Type

Steering (Rail to Rail)

Terminal Finish

Tin/Lead (Sn85Pb15)

Applications

General Purpose

Power Rating

200mW

Voltage - Rated DC

30V

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

200mW

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

235

Number of Functions

1

Current Rating

Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.

200mA

Time@Peak Reflow Temperature-Max (s)

10

Base Part Number

QSBT40

Pin Count

a count of all of the component leads (or pins)

6

Power Line Protection

During fault, the only circuit breaker closest to the fault point should be tripped. The operating time of relay associated with protection of line should be as minimum as possible in order to prevent unnecessary tripping of circuit breakers associated with other healthy parts of power system.

No

Forward Current

Current which flows upon application of forward voltage.

200mA

Unidirectional Channels

4

Forward Voltage

the amount of voltage needed to get current to flow across a diode.

1V

Differential Output

a differential output voltage in electronics is the difference between the values of two AC voltages, 180° out of phase, present at the output terminals of an amplifier when you apply a differential input voltage to the input terminals of an amplifier.

NO

Reverse Recovery Time

5 ns

Peak Reverse Current

The maximum voltage that a diode can withstand in the reverse direction without breaking down or avalanching.If this voltage is exceeded the diode may be destroyed. Diodes must have a peak inverse voltage rating that is higher than the maximum voltage that will be applied to them in a given application.

2μA

Max Repetitive Reverse Voltage (Vrrm)

30V

Capacitance @ Frequency

10pF @ 1MHz

Peak Non-Repetitive Surge Current

600mA

Max Forward Surge Current (Ifsm)

600mA

Number of Signal Lines

4

Length

2.2mm

Height

1mm

Width

1.35mm

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

Non-RoHS Compliant

Lead Free

Contains Lead