Ecliptek EC2945ETTTS-80.000MHZ

Package / Case

0603 (1608 Metric)

Supplier Device Package

0603

Package

Tape & Reel (TR);Cut Tape (CT);Digi-Reel®;

Base Product Number

RN73R1J

Mfr

KOA Speer Electronics, Inc.

Product Status

Active

RoHS

Compliant

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C ~ 155°C

Series

RN73R

Size / Dimension

0.063 L x 0.031 W (1.60mm x 0.80mm)

Tolerance

±0.5%

Number of Terminations

2

Termination

SMD/SMT

Temperature Coefficient

The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

±10ppm/°C

Resistance

2.1 kOhms

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

85 °C

Min Operating Temperature

-40 °C

Composition

Thin Film

Power (Watts)

0.1W, 1/10W

Frequency

80 MHz

Frequency Stability

the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

50 ppm

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

1.8 V

Failure Rate

the frequency with which an engineered system or component fails, expressed in failures per unit of time. It is usually denoted by the Greek letter λ (lambda) and is often used in reliability engineering.

-

Load Capacitance

the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

15 pF

Features

Automotive AEC-Q200, Moisture Resistant

Height Seated (Max)

0.022 (0.55mm)

Ratings

AEC-Q200