E-Switch EG1218

Factory Lead Time

11 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Silver

Mount

Surface Mount

Mounting Type

Through Hole

Package / Case

SOT-23-5

Number of Pins

3

Contact Materials

Copper Alloy

ElectricalLife

10000 cycles

Voltage Rated

RATED voltage is the voltage on the nameplate - the "design point" for maximum power throughput and safe thermal operation.

30V

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-20°C~70°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Bulk

Series

EG

Published

2007

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Termination

PC Pin

Number of Positions

2

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

70°C

Min Operating Temperature

-20°C

Power Rating

250mW

Voltage - Rated DC

30V

Current Rating (Amps)

200mA DC

Orientation

Vertical

Current Rating

Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.

200mA

Contact Finish

Silver

Termination Style

PC Pin

Voltage - Rated AC

30V

Actuator Type

Standard

Output Voltage

3.3V

Max Output Current

The maximum current that can be supplied to the load.

150mA

Circuit

SPDT

Switch Function

This function will evaluate a given expression (or a value) against a list of values and will return a result corresponding to the first matching value. In case there is no matching value, an optional default value will be returned.

On-On

Contact Style

Non-Shorting

Contact Resistance

20mOhm

Insulation Resistance

The measurement of insulation resistance is carried out by means of a megohmmeter – high resistance range ohmmeter. A general rule-of-thumb is 10 Megohm or more.

100Ohm

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

150mA

Throw Configuration

SPDT

Contact Current Rating

The current rating of a contact is defined as the current level that creates a certain temperature rise of the contact spring — usually 20°C or 30°C. Both electrical and thermal factors govern the heat created by the current.

200mA

Min Input Voltage

4.3V

Operating Force

250gf

Illumination Type

Non-Illuminated

Dropout Voltage

Dropout voltage is the input-to-output differential voltage at which the circuit ceases to regulate against further reductions in input voltage; this point occurs when the input voltage approaches the output voltage.

300mV

Contact Timing

Non-Shorting (BBM)

Nominal Output Voltage

3.3V

Switch Travel

2.50mm

Height

1.3mm

Length

3mm

Width

1.8mm

Actuator Length

2.00mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free