Exar Corporation XRP2525ID-2-F

Mount

Surface Mount

Package / Case

SOIC

Number of Pins

8

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

22 μs

JESD-609 Code

e3

Number of Terminations

8

ECCN Code

EAR99

Resistance

140MOhm

Terminal Finish

Matte Tin (Sn)

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

85°C

Min Operating Temperature

-40°C

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Number of Functions

1

Supply Voltage

5V

Current Rating

Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.

900mA

Pin Count

a count of all of the component leads (or pins)

8

Number of Outputs

1

Max Output Current

The maximum current that can be supplied to the load.

900mA

Power Supplies

an electronic circuit that converts the voltage of an alternating current (AC) into a direct current (DC) voltage.?

2/5V

Temperature Grade

Temperature grades represent a tire's resistance to heat and its ability to dissipate heat when tested under controlled laboratory test conditions.

INDUSTRIAL

Number of Channels

1

Interface

On/Off

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

5.5V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

1.8V

Analog IC - Other Type

POWER SUPPLY SUPPORT CIRCUIT

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

52μA

Output Configuration

High Side

Adjustable Threshold

NO

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

2 ms

Nominal Input Voltage

The actual voltage at which a circuit operates can vary from the nominal voltage within a range that permits satisfactory operation of equipment. The word “nominal” means “named”.

5.5V

Fault Protection

Protection against electric shock under. single fault conditions.

Over Temperature, Reverse Current

Length

4.9mm

Width

3.9mm

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

RoHS Compliant

Lead Free

Lead Free