Festo SIEN-M5B-PO-K-L

Mounting Type

Surface Mount

Package / Case

4-SMD, No Lead

Housing Material

Polyamide, Stainless Steel

Package

Bulk

Mfr

Suntsu Electronics, Inc.

Product Status

Active

Maximum Operating Temperature

the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

+70°C

Minimum Operating Temperature

-25°C

Standards Met

CE, cULus, EN 60947-5-2, EU EMC, RCM

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-30°C ~ 85°C

Series

SXT224

Size / Dimension

0.098 L x 0.079 W (2.50mm x 2.00mm)

Type

MHz Crystal

Shielding

Unshielded

Supply Voltage

10 → 30 V dc

Frequency

13 MHz

Frequency Stability

the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

±30ppm

Output Type

PNP

ESR (Equivalent Series Resistance)

120 Ohms

Load Capacitance

the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

17pF

Operating Mode

A phase of operation during the operation and maintenance stages of the life cycle of a facility.

Fundamental

Frequency Tolerance

the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

±30ppm

Thread Size

given in nominal sizes, not in the actual measurement.

M5 x 0.5

Terminal Type

Terminal type or emulation specifies how your computer and the host computer to which you are connected exchange information.

Cable

Switching Current

200 mA

Body Style

Barrel

IP Rating

IP (or "Ingress Protection") ratings are defined in international standard EN 6529 (British BS EN 6529:1992, European IEC 659:1989). They are?used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies?(tools, dirt etc) and moisture.

IP67

Height Seated (Max)

0.026 (0.65mm)

Length

25mm

Ratings

-