HEYCO PRODUCTS 13014

Package / Case

20-VFQFN Exposed Pad

Supplier Device Package

20-QFN-EP (4x4)

Material

Nylon

Alternate PN

NTMP-124-177

RoHS

Non-Compliant

Width - in

0.394 in

Length - in

17.7 in

Unit Weight

0.599657 oz

Factory Pack QuantityFactory Pack Quantity

1000

Length - mm

450 mm

Mounting Styles

-

Width - mm

10 mm

Manufacturer

Heyco

Brand

Heyco

Maximum Bundle Diameter - in

4.72 in

Maximum Bundle Diameter - mm

120 mm

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C ~ 85°C (TA)

Series

--

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Cut Tape (CT)

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Type

Barb Lock

Color

Natural

Subcategory

Wire & Cable Management

Base Part Number

ISL6420A

Function

Step-Down

Number of Outputs

1

Output Type

Transistor Driver

Output Configuration

Positive

Voltage - Supply (Vcc/Vdd)

5.6 V ~ 28 V

Control Features

Enable, Frequency Control, Phase Control, Power Good, Soft Start

Topology

Buck

Frequency - Switching

100kHz ~ 1.4MHz

Synchronous Rectifier

Synchronous rectification is a technique for improving the efficiency of rectification by replacing diodes with actively controlled switches, usually power MOSFETs or power bipolar junction transistors (BJT).

Yes

Product Type

a group of products which fulfill a similar need for a market segment or market as a whole.

Cable Ties

Duty Cycle (Max)

96%

Tensile Strength

Ultimate tensile strength (UTS), often shortened to tensile strength (TS), ultimate strength, or Ftu within equations, is the maximum stress that a material can withstand while being stretched or pulled before breaking. In brittle materials the ultimate tensile strength is close to the yield point, whereas in ductile materials the ultimate tensile strength can be higher.

124 lbs

Serial Interfaces

A serial interface is a communication interface between two digital systems that transmits data as a series of voltage pulses down a wire. Essentially, the serial interface encodes the bits of a binary number by their "temporal" location on a wire rather than their "spatial" location within a set of wires.

--

Clock Sync

Clock synchronization is a topic in computer science and engineering that aims to coordinate otherwise independent clocks. Even when initially set accurately, real clocks will differ after some amount of time due to clock drift, caused by clocks counting time at slightly different rates.

No

Output Phases

1

Features

-

Product Category

a particular group of related products.

Cable Ties