Honeywell Sensing and Productivity Solutions SCX01DNC

Factory Lead Time

11 Weeks

Mount

Through Hole

Package / Case

6-SIP

Number of Pins

6

Supplier Device Package

6-SIP

Voltage Rated

RATED voltage is the voltage on the nameplate - the "design point" for maximum power throughput and safe thermal operation.

20V

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C

Series

SCX

Published

2003

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Resistance

4kOhm

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

85°C

Min Operating Temperature

-40°C

Applications

Board Mount

Voltage - Rated DC

20V

Voltage - Supply

20V

Output

0 mV ~ 18 mV (12V)

Termination Style

PC Pin

Lead Pitch

2.54mm

Output Voltage

18mV

Output Type

Wheatstone Bridge

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

20V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

0V

Accuracy

±1%

Response Time

the time taken for a circuit or measuring device, when subjected to a change in input signal, to change its state by a specified fraction of its total response to that change.

100 μs

Reference Voltage

A voltage reference is an electronic device that ideally produces a fixed (constant) voltage irrespective of the loading on the device, power supply variations, temperature changes, and the passage of time. Voltage references are used in power supplies, analog-to-digital converters, digital-to-analog converters, and other measurement and control systems. Voltage references vary widely in performance; a regulator for a computer power supply may only hold its value to within a few percent of the nominal value, whereas laboratory voltage standards have precisions and stability measured in parts per million.

12V

Operating Pressure

An operating pressure is the amount of internal force applied to the walls of some type of pressure vessel during normal conditions.

1PSI (6.89kPa)

Pressure Type

Differential

Port Style

Barbed

Port Size

Male - 0.19 4.8mm Tube Dual

Linearity

1 %

Maximum Pressure

20PSI (137.9kPa)

Max Pressure

1 PSI

Features

Temperature Compensated

Height

27.4mm

Width

27.9mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

RoHS Compliant