Infineon Technologies IR2113PBF

Factory Lead Time

12 Weeks

Mount

Surface Mount, Through Hole

Mounting Type

Through Hole

Package / Case

14-DIP (0.300, 7.62mm)

Number of Pins

14

Driver Configuration

Half-Bridge

Logic voltage-VIL, VIH

6V 9.5V

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

20 ns

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~150°C TJ

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

Published

1996

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

14

Termination

SMD/SMT

ECCN Code

EAR99

Type

Integrated Circuit (IC)

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

1.25W

Voltage - Supply

3.3V~20V

Terminal Position

DUAL

Number of Functions

1

Supply Voltage

15V

Base Part Number

IR2113PBF

Number of Outputs

2

Output Voltage

20V

Max Output Current

The maximum current that can be supplied to the load.

2A

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

15V

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

340μA

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

1.25W

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

2.5A

Max Supply Current

340μA

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

150 ns

Input Type

Non-Inverting

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

20 ns

Max Output Voltage

The maximum output voltage refers to the dynamic area beyond which the output is saturated in the positive or negative direction, and is limited according to the load resistance value.

20V

Reference Voltage

A voltage reference is an electronic device that ideally produces a fixed (constant) voltage irrespective of the loading on the device, power supply variations, temperature changes, and the passage of time. Voltage references are used in power supplies, analog-to-digital converters, digital-to-analog converters, and other measurement and control systems. Voltage references vary widely in performance; a regulator for a computer power supply may only hold its value to within a few percent of the nominal value, whereas laboratory voltage standards have precisions and stability measured in parts per million.

600V

Rise Time

In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

35ns

Fall Time (Typ)

25 ns

Min Output Voltage

10V

Rise / Fall Time (Typ)

25ns 17ns

Channel Type

Independent

Turn On Time

The time that it takes a gate circuit to allow a current to reach its full value.

0.15 μs

Output Peak Current Limit-Nom

2.5A

Gate Type

IGBT, N-Channel MOSFET

Current - Peak Output (Source, Sink)

2A 2A

High Side Driver

YES

Height

2.35mm

Length

10.4902mm

Width

7.11mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Contains Lead, Lead Free