Integrated Device Technology (IDT) IDT74LVCC3245APGG

Mount

Surface Mount

Package / Case

TSSOP

Number of Pins

24

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Rail/Tube

Published

2006

JESD-609 Code

e3

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

24

Terminal Finish

Matte Tin (Sn) - annealed

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

85°C

Min Operating Temperature

-40°C

Additional Feature

Any Feature, including a modified Existing Feature, that is not an Existing Feature.

PORT B OPERATES FROM 3V TO 5.5V SUPPLY

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

260

Number of Functions

1

Supply Voltage

2.5V

Terminal Pitch

The center distance from one pole to the next.

0.65mm

Reach Compliance Code

unknown

Time@Peak Reflow Temperature-Max (s)

30

Pin Count

a count of all of the component leads (or pins)

24

Qualification Status

An indicator of formal certification of qualifications.

Not Qualified

Output Type

Voltage

Polarity

Non-Inverting

Power Supplies

an electronic circuit that converts the voltage of an alternating current (AC) into a direct current (DC) voltage.?

3.35V

Temperature Grade

Temperature grades represent a tire's resistance to heat and its ability to dissipate heat when tested under controlled laboratory test conditions.

INDUSTRIAL

Number of Channels

1

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

5.5V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

2.3V

Number of Ports

A port is identified for each transport protocol and address combination by a 16-bit unsigned number,.

2

Number of Bits

8

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

6 ns

Quiescent Current

The quiescent current is defined as the current level in the amplifier when it is producing an output of zero.

80μA

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

14.5 ns

Family

LVC/LCX/Z

Logic Function

Translator

Output Characteristics

3-STATE

Logic IC Type

BUS TRANSCEIVER

High Level Output Current

High-level Output Current IOH The current flowing into the output at a specified high- level voltage. Low-level Output Current IOL The current flowing into the output at a specified low- level output voltage.

-24mA

Low Level Output Current

The current into the output terminal with input conditions applied that, according to the product specification, will establish a low level at the output.

24mA

Control Type

COMMON CONTROL

Count Direction

BIDIRECTIONAL

Translation

3V & 3/5V

Width

4.4mm

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

RoHS Compliant