IS46DR32801A-5BBLA2
-
32791092-IS46DR32801A-5BBLA2
AUTOMOTIVE (TC: -40 TO +105C), 256M, 1.8V, DDR2, REDUCED PAG
having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.
The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.
Any Feature, including a modified Existing Feature, that is not an Existing Feature.
HTS (Harmonized Tariff Schedule) codes are product classification codes between 8-1 digits. The first six digits are an HS code, and the countries of import assign the subsequent digits to provide additional classification. U.S. HTS codes are 1 digits and are administered by the U.S. International Trade Commission.
Occurring at or forming the end of a series, succession, or the like; closing; concluding.
The center distance from one pole to the next.
a count of all of the component leads (or pins)
An indicator of formal certification of qualifications.
an electronic circuit that converts the voltage of an alternating current (AC) into a direct current (DC) voltage.?
Temperature grades represent a tire's resistance to heat and its ability to dissipate heat when tested under controlled laboratory test conditions.
In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.
The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.
The memory capacity is the amount of data a device can store at any given time in its memory.
A port is identified for each transport protocol and address combination by a 16-bit unsigned number,.
A phase of operation during the operation and maintenance stages of the life cycle of a facility.
Distinct operation recognized by the protection mechanisms as a possible operation on an object.