International Rectifier AUIPS6031STRR

Package / Case

Axial

Mount

Surface Mount

Supplier Device Package

Axial

Package

Tape & Reel (TR)

Base Product Number

RNC55

Mfr

Vishay Dale

Product Status

Active

RoHS

Compliant

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-65°C ~ 175°C

Series

Military, MIL-PRF-55182/01, RNC55

Size / Dimension

0.094 Dia x 0.250 L (2.39mm x 6.35mm)

Tolerance

±0.1%

Number of Terminations

2

Temperature Coefficient

The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

±25ppm/°C

Resistance

3.48 kOhms

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

150 °C

Min Operating Temperature

-40 °C

Composition

Metal Film

Power (Watts)

0.125W, 1/8W

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

3.1 W

Number of Outputs

1

Failure Rate

the frequency with which an engineered system or component fails, expressed in failures per unit of time. It is usually denoted by the Greek letter λ (lambda) and is often used in reliability engineering.

S (0.001%)

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

2.2 mA

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

3.1 W

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

3.1 A

Rise Time

In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

20 µs

Features

Military, Moisture Resistant, Weldable

Height Seated (Max)

-

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No