International Rectifier IR2235PBF

Lifecycle Status

Production (Last Updated: 2 years ago)

Mounting Type

Through Hole

Package / Case

28-DIP (0.600, 15.24mm)

Mount

Through Hole

Number of Pins

28

Supplier Device Package

28-DIP

Package Quantity

494

Manufacturer Part Number

71A7941500D

Manufacturer

Philips Advance Transformer

Package

Bulk

Mfr

International Rectifier

Product Status

Active

Logic voltage-VIL, VIH

0.8V, 2V

Driver Configuration

Half-Bridge

RoHS

Compliant

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

950 ns

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

125°C (TJ)

Series

-

Resistance

100 Ω

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

125 °C

Min Operating Temperature

-40 °C

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

1.5 W

Voltage - Supply

10V ~ 20V

Number of Outputs

3

Output Voltage

300 mV

Max Output Current

The maximum current that can be supplied to the load.

500 mA

Number of Channels

6

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

20 V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

10 V

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

100 µA

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

1.5 W

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

200 mA

Input Type

Inverting

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

750 ns

Rise Time

In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

150 ns

Rise / Fall Time (Typ)

90ns, 40ns

Channel Type

3-Phase

Number of Drivers

6

Gate Type

IGBT, N-Channel MOSFET

Current - Peak Output (Source, Sink)

250mA, 500mA

High Side Voltage - Max (Bootstrap)

1200 V

Width

14.732 mm

Height

5.969 mm

Length

39.7256 mm

Lead Free

Contains Lead