IS25WP064A-JBLE

ISSI, Integrated Silicon Solution Inc IS25WP064A-JBLE

Part No:

IS25WP064A-JBLE

Datasheet:

-

Package:

8-SOIC (0.209, 5.30mm Width)

ROHS:

AINNX NO:

1731787-IS25WP064A-JBLE

Category:

Memory

Description:

IC FLASH 64M SPI 133MHZ 8SOIC

Products specifications
  • Factory Lead Time
    8 Weeks
  • Mounting Type
    Surface Mount
  • Package / Case
    8-SOIC (0.209, 5.30mm Width)
  • Surface Mount

    having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

    YES
  • Number of Pins
    8
  • Memory Types
    Non-Volatile
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -40°C~105°C TA
  • Packaging

    Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

    Bulk
  • JESD-609 Code
    e3
  • Part Status

    Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

    Active
  • Moisture Sensitivity Level (MSL)
    3 (168 Hours)
  • Number of Terminations
    8
  • Terminal Finish
    Tin (Sn)
  • Voltage - Supply
    1.65V~1.95V
  • Terminal Position
    DUAL
  • Peak Reflow Temperature (Cel)
    NOT SPECIFIED
  • Number of Functions
    1
  • Supply Voltage
    1.8V
  • Terminal Pitch

    The center distance from one pole to the next.

    1.27mm
  • Time@Peak Reflow Temperature-Max (s)
    NOT SPECIFIED
  • Supply Voltage-Max (Vsup)
    1.95V
  • Supply Voltage-Min (Vsup)
    1.65V
  • Memory Size

    The memory capacity is the amount of data a device can store at any given time in its memory.

    64Mb 8M x 8
  • Operating Mode

    A phase of operation during the operation and maintenance stages of the life cycle of a facility.

    SYNCHRONOUS
  • Clock Frequency
    133MHz
  • Memory Format
    FLASH
  • Memory Interface

    An external memory interface is a bus protocol for communication from an integrated circuit, such as a microprocessor, to an external memory device located on a circuit board.

    SPI - Quad I/O, QPI, DTR
  • Memory Width
    8
  • Write Cycle Time - Word, Page
    800μs
  • Parallel/Serial
    SERIAL
  • Height Seated (Max)
    2.16mm
  • RoHS Status

    RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

    ROHS3 Compliant
0 Similar Products Remaining