IXYS Integrated Circuits Division IX3120GSTR

Factory Lead Time

8 Weeks

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

8-SMD, Gull Wing

Number of Pins

8

Supplier Device Package

8-SMD

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~100°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Published

2014

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

100°C

Min Operating Temperature

-40°C

Approval Agency

UR

Voltage - Isolation

3750Vrms

Max Output Current

The maximum current that can be supplied to the load.

2.5A

Number of Channels

1

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

30V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

15V

Voltage - Forward (Vf) (Typ)

1.24V

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

500 ns

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

500 ns

Forward Voltage

the amount of voltage needed to get current to flow across a diode.

1.24V

Rise / Fall Time (Typ)

100ns 100ns

High Level Output Current

High-level Output Current IOH The current flowing into the output at a specified high- level voltage. Low-level Output Current IOL The current flowing into the output at a specified low- level output voltage.

2A

Low Level Output Current

The current into the output terminal with input conditions applied that, according to the product specification, will establish a low level at the output.

2A

Current - DC Forward (If) (Max)

20mA

Propagation Delay tpLH / tpHL (Max)

500ns, 500ns

Common Mode Transient Immunity (Min)

25kV/μs

Pulse Width Distortion (PWD)

300 ns

Pulse Width Distortion (Max)

300ns

Voltage - Output Supply

15V~30V

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant