IXYS Integrated Circuits Division IXDN609SI

Factory Lead Time

8 Weeks

Mounting Type

Surface Mount

Package / Case

8-SOIC (0.154, 3.90mm Width) Exposed Pad

Number of Pins

8

Supplier Device Package

8-SOIC-EP

Weight

540.001716mg

Driver Configuration

Low-Side

Logic voltage-VIL, VIH

0.8V 3V

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

75 ns

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C~150°C TJ

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

Published

2010

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

125°C

Min Operating Temperature

-40°C

Voltage - Supply

4.5V~35V

Number of Outputs

1

Max Output Current

The maximum current that can be supplied to the load.

2A

Number of Channels

1

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

35V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

4.5V

Operating Supply Current

10μA

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

2A

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

30 ns

Input Type

Non-Inverting

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

75 ns

Rise Time

In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

22ns

Fall Time (Typ)

15 ns

Rise / Fall Time (Typ)

22ns 15ns

Channel Type

Single

Number of Drivers

1

Gate Type

IGBT, N-Channel, P-Channel MOSFET

Current - Peak Output (Source, Sink)

9A 9A

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free