Kabel 11011

Mounting Type

Surface Mount

Package / Case

4-SOJ, 5.5mm pitch

Package

Bulk

Mfr

Suntsu Electronics, Inc.

Product Status

Active

Stranding element

No

Flame retardant

According to IEC/EN 60332-1-2

Permitted cable outer temperature after assembling without vibration

-40 - 80

Material core insulation

Polyvinyl chloride (PVC)

Colour outer sheath

Grey

Permitted cable outer temperature during assembling/handling

-15 - 80

Outer diameter approx.

7.4

Screen over stranding element

None

Core identification

Colour + rings

Nominal cross section conductor

0.5

Screen over stranding

None

Nominal voltage U0

300

Low smoke (according to EN 61034-2)

No

Min. permitted bending radius, moving application/free movement

56

Min. permitted bending radius, stationary application/permanent installation

30

Nominal voltage U

500

Material outer sheath

Polyvinyl chloride (PVC)

Conductor category

Class 5 = flexible

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C ~ 85°C

Series

SXT834

Size / Dimension

0.315 L x 0.150 W (8.00mm x 3.80mm)

Type

MHz Crystal

Frequency

40 MHz

Frequency Stability

the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

±25ppm

ESR (Equivalent Series Resistance)

40 Ohms

Load Capacitance

the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

18pF

Operating Mode

A phase of operation during the operation and maintenance stages of the life cycle of a facility.

Fundamental

Frequency Tolerance

the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

±20ppm

Height Seated (Max)

0.098 (2.50mm)

Ratings

-