28015

Kabel 28015

Part No:

28015

Manufacturer:

Kabel

Datasheet:

-

Package:

4-SMD, No Lead

AINNX NO:

35942407-28015

Description:

Power cable < 1 kV, for moving application

Products specifications
  • Mounting Type
    Surface Mount
  • Package / Case
    4-SMD, No Lead
  • Package
    Tape & Reel (TR);Cut Tape (CT);Digi-Reel®;
  • Mfr
    Abracon LLC
  • Product Status
    Active
  • Stranding element
    No
  • Permitted cable outer temperature after assembling without vibration
    -40 - 80
  • Material core insulation
    Rubber
  • Colour outer sheath
    Black
  • Permitted cable outer temperature during assembling/handling
    -30 - 70
  • Screen over stranding element
    None
  • Core identification
    Numbers
  • Nominal cross section conductor
    4
  • Screen over stranding
    None
  • Nominal voltage U0
    300
  • Low smoke (according to EN 61034-2)
    No
  • Nominal voltage U
    500
  • Material outer sheath
    Rubber
  • Conductor category
    Class 5 = flexible
  • Insulation Materials
    Rubber
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    0°C ~ 70°C
  • Series
    ABM3B
  • Size / Dimension
    0.197 L x 0.126 W (5.00mm x 3.20mm)
  • Type
    MHz Crystal
  • Frequency
    25 MHz
  • Frequency Stability

    the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

    ±35ppm
  • ESR (Equivalent Series Resistance)
    50 Ohms
  • Load Capacitance

    the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

    22pF
  • Operating Mode

    A phase of operation during the operation and maintenance stages of the life cycle of a facility.

    Fundamental
  • Frequency Tolerance

    the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

    ±30ppm
  • Height Seated (Max)
    0.043 (1.10mm)
  • Ratings
    -
0 Similar Products Remaining