32368

Kabel 32368

Part No:

32368

Manufacturer:

Kabel

Datasheet:

-

Package:

-

AINNX NO:

40018351-32368

Category:

Accessories

Description:

Power cable < 1 kV, for moving application

Products specifications
  • Voltage Rated

    RATED voltage is the voltage on the nameplate - the "design point" for maximum power throughput and safe thermal operation.

    300V
  • Stranding element
    No
  • Flame retardant
    According to IEC/EN 60332-3-24
  • Permitted cable outer temperature after assembling without vibration
    -40 - 70
  • Colour outer sheath
    Black
  • Permitted cable outer temperature during assembling/handling
    -5 - 70
  • Outer diameter approx.
    5.4
  • Screen over stranding element
    None
  • Core identification
    Colour + rings
  • Nominal cross section conductor
    0.75
  • Screen over stranding
    None
  • Nominal voltage U0
    300
  • Low smoke (according to EN 61034-2)
    Yes
  • Min. permitted bending radius, moving application/free movement
    41
  • Nominal voltage U
    500
  • Material outer sheath
    Other
  • Conductor category
    Class 5 = flexible
  • Series
    Magnum® C7021
  • Part Status

    Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

    Active
  • Type
    Power Feed Thru Terminal Block
  • Current Rating

    Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.

    115A
  • Number of Poles
    4
  • Load Side Connection Type

    Applied when there are no circuit breaker slots available. The wires are connected directly to the existing wires, between the electrical panel and (on the load side of) the main breaker. Some utilities do not allow this connection or do so only if it is approved by a professional electrician.

    Stud
  • Line Side Connection Type

    This method requires that the wires from the inverter are connected to the service wires on the line side of the circuit breaker. This connection is very rarely allowed for residential systems but is increasingly common in commercial systems. Utilities usually require that the design for this connection and the installation are approved by a professional electrician.

    Stud
  • Load Side Connections Per Pole
    1
  • Line Side Wire/Stud Size
    #2/0-8 AWG
  • Line Side Connections Per Pole
    1
  • Load Side Wire/Stud Size
    #2/0-8 AWG
0 Similar Products Remaining