Mounting Type
Through Hole
Housing Material
Thermoplastic
Package
Bulk
Base Product Number
OQ04
Mfr
Amphenol Anytek
Torque-Screw
-
Current-UL
20 A
Product Status
Active
Contact Materials
Copper
Voltage-UL
300 V
Current-IEC
-
Halogen-free
No
No. of leads
2x
Manufacturer part #
35001
Min. temperature range (fixed installation)
-30°C
Nominal voltage
500V
Max. temperature range (fixed installation)
60°C
Max. length sold by the metre
100m
Content
Sold per metre
Wire ID code
Wire identification according to DIN VDE 0293-308<br>- Up to 5 wires colored<br>- From 6 wires black with consecutive white digit Imprint
Cross section (each core)
0.75mm²
Bend radius (no. of ODs for fixed installation)
7.5
Sold per metre
Yes
Nominal voltage U0
300V
Cable features
Flame-retardant,Oil-resistant,Cold-resistant,Harmonised
Core layout
Cu-blank, according to DIN VDE 0295 KL.5, fine, BS 6360 cl. 5, IEC 60228 37
Outside Ø
6.6
Bend radius (no. of ODs for flexible installation)
7.5
Factory colour
Black
Certification marks
DIN VDE 0285-525 -2-21
Stranding element
No
Flame retardant
According to IEC/EN 60332-1-2
Permitted cable outer temperature after assembling without vibration
-30 - 60
Material core insulation
Rubber
Colour outer sheath
Black
Permitted cable outer temperature during assembling/handling
-25 - 60
Outer diameter approx.
6.6
Screen over stranding element
None
Core identification
Colour + rings
Nominal cross section conductor
0.75
Screen over stranding
None
Low smoke (according to EN 61034-2)
No
Min. permitted bending radius, moving application/free movement
50
Min. permitted bending radius, stationary application/permanent installation
50
Nominal voltage U
750
Material outer sheath
Rubber
Conductor category
Class 5 = flexible
Operating Temperature
The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.
-40°C ~ 115°C
Series
OQ
Type
Header, Male Pins, Shrouded (2 Side)
Number of Positions
4
Color
Gray
Pitch
0.295 (7.50mm)
Ingress Protection
Ingress Protection rating (or just IP rating), is an international standard (IEC 60529) used to rate the degree of protection or sealing effectiveness in electrical enclosures against intrusion of objects, water, dust or accidental contact. It corresponds to the European standard EN 60529.
-
Insulation Height
0.335 (8.51mm)
Termination Style
Solder
Contact Tail Length
0.138 (3.50mm)
Number of Levels
1
Contact Mating Finish
Tin
Wire Gauge or Range - AWG
-
Positions Per Level
4
Plug Wire Entry
-
Header Orientation
90°, Right Angle
Wire Gauge or Range - mm²
-
Wire Strip Length
-
Shielded
No
Screw Size
-
Features
-
Material Flammability Rating
UL94 V-0