Kabel 37310

Mounting Type

Surface Mount

Package / Case

4-SMD, No Lead

Package

Bulk

Mfr

Suntsu Electronics, Inc.

Product Status

Active

Stranding element

No

Permitted cable outer temperature after assembling without vibration

-40 - 80

Material core insulation

Rubber

Colour outer sheath

Black

Permitted cable outer temperature during assembling/handling

-25 - 80

Outer diameter approx.

20.2

Screen over stranding element

None

Core identification

Colour + rings

Nominal cross section conductor

10

Screen over stranding

None

Nominal voltage U0

450

Low smoke (according to EN 61034-2)

No

Min. permitted bending radius, moving application/free movement

122

Min. permitted bending radius, stationary application/permanent installation

81

Nominal voltage U

750

Conductor category

Class 5 = flexible

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-10°C ~ 60°C

Series

SXT224

Size / Dimension

0.098 L x 0.079 W (2.50mm x 2.00mm)

Type

MHz Crystal

Frequency

13.56 MHz

Frequency Stability

the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

±20ppm

ESR (Equivalent Series Resistance)

120 Ohms

Load Capacitance

the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

12pF

Operating Mode

A phase of operation during the operation and maintenance stages of the life cycle of a facility.

Fundamental

Frequency Tolerance

the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

±15ppm

Height Seated (Max)

0.026 (0.65mm)

Ratings

-