Linear Technology/Analog Devices LT1336CS#PBF

Lifecycle Status

PRODUCTION (Last Updated: 4 months ago)

Factory Lead Time

8 Weeks

Mounting Type

Surface Mount

Package / Case

16-SOIC (0.154, 3.90mm Width)

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

YES

Number of Pins

16

Driver Configuration

Half-Bridge

Logic voltage-VIL, VIH

0.8V 2V

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

600 ns

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

0°C~125°C TJ

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

Published

2010

JESD-609 Code

e3

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

16

ECCN Code

EAR99

Terminal Finish

Matte Tin (Sn)

Voltage - Supply

10V~15V

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

260

Number of Functions

1

Supply Voltage

12V

Time@Peak Reflow Temperature-Max (s)

30

Base Part Number

LT1336

Pin Count

a count of all of the component leads (or pins)

16

Output Voltage

75V

Max Output Current

The maximum current that can be supplied to the load.

1.5A

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

12V

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

1.5A

Supply Current-Max

40mA

Input Type

Non-Inverting

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

500 ns

Output Characteristics

TOTEM-POLE

Rise Time

In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

200ns

Fall Time (Typ)

140 ns

Output Polarity

TRUE

Input Characteristics

SCHMITT TRIGGER

Rise / Fall Time (Typ)

130ns 60ns

Channel Type

Independent

Number of Drivers

2

Turn On Time

The time that it takes a gate circuit to allow a current to reach its full value.

0.5 µs

Output Peak Current Limit-Nom

1.5A

Gate Type

N-Channel MOSFET

Current - Peak Output (Source, Sink)

1.5A 1.5A

High Side Driver

YES

Turn Off Time

0.6 µs

High Side Voltage - Max (Bootstrap)

60V

Height

1.498mm

Length

10.01mm

Width

3.988mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free