Mennekes 252

Mounting Type

Surface Mount

Package / Case

2010 (5025 Metric), Concave, Long Side Terminals

Number of Pins

8

Supplier Device Package

--

Body Orientation

Straight

Voltage, Rating

400 V

Maximum Operating Temperature

the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

+55°C

Minimum Operating Temperature

-25

Termination Method

Screw Terminal

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C ~ 125°C

Series

RACF

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Size / Dimension

0.200 L x 0.118 W (5.08mm x 3.00mm)

Tolerance

±5%

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Temperature Coefficient

The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

±200ppm/°C

Applications

--

Gender

Male

Current Rating

Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.

16A

Number of Resistors

4

Circuit Type

There are 5 Main Types of Electric Circuit – Close Circuit, Open Circuit, Short Circuit, Series Circuit and Parallel Circuit.

Isolated

Power Per Element

125mW

Resistor-Ratio-Drift

--

Resistance (Ohms)

22k

Resistor Matching Ratio

The resistor matching is done for better resistor poly arrangement and spacing(it is process dependent ),but the sheilding is used to protect critical nets from crossing noisy signals.

--

IP Rating

IP (or "Ingress Protection") ratings are defined in international standard EN 6529 (British BS EN 6529:1992, European IEC 659:1989). They are?used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies?(tools, dirt etc) and moisture.

IP44

Height Seated (Max)

0.028 (0.70mm)