Microchip Technology ATWILC1000-MR110PB

Factory Lead Time

16 Weeks

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

28-SMD Module, Exposed Pad

Number of Pins

40

Usage Level

Industrial grade

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tray

Published

2015

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

3 (168 Hours)

Number of Terminations

28

Voltage - Supply

3.3V~4.3V

Terminal Position

UNSPECIFIED

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

NO LEAD

Number of Functions

1

Supply Voltage

3.6V

Frequency

2.4GHz

Base Part Number

ATWILC1000

JESD-30 Code

R-XXMA-N28

Interface

I2C, SPI, UART

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

22mA

Data Rate

Data Rate is defined as the amount of data transmitted during a specified time period over a network. It is the speed at which data is transferred from one device to another or between a peripheral device and the computer. It is generally measured in Mega bits per second(Mbps) or Mega bytes per second(MBps).

72.2Mbps

Protocol

802.11b/g/n

Telecom IC Type

TELECOM CIRCUIT

Power - Output

19dBm

RF Family/Standard

WiFi

Antenna Type

There are several different types of antennas in three broad categories: omni-directional, directional, and semi-directional.

Integrated, Trace

Serial Interfaces

A serial interface is a communication interface between two digital systems that transmits data as a series of voltage pulses down a wire. Essentially, the serial interface encodes the bits of a binary number by their "temporal" location on a wire rather than their "spatial" location within a set of wires.

I2C, SDIO, SPI, UART

Current - Receiving

29mA~68mA

Current - Transmitting

29mA~230mA

Modulation

16-QAM, 64-QAM, BPSK, CCK, DBPSK, DQPSK, OFDM, QPSK

Sensitivity (dBm)

-98 dBm

Number of GPIO

5

Height

2.113mm

Length

21.72mm

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free