Microchip Technology MIC2505YM

Factory Lead Time

7 Weeks

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

8-SOIC (0.154, 3.90mm Width)

Number of Pins

8

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

20 μs

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

Published

1998

JESD-609 Code

e4

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

8

ECCN Code

EAR99

Resistance

75mOhm

Terminal Finish

Nickel/Palladium/Gold (Ni/Pd/Au)

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

260

Number of Functions

1

Supply Voltage

5V

Current Rating

Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.

2A

Time@Peak Reflow Temperature-Max (s)

40

Base Part Number

MIC2505

Number of Outputs

1

Output Type

N-Channel

Max Output Current

The maximum current that can be supplied to the load.

2A

Number of Channels

1

Interface

On/Off

Analog IC - Other Type

POWER SUPPLY SUPPORT CIRCUIT

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

2A

Output Configuration

High Side

Voltage - Supply (Vcc/Vdd)

Not Required

Adjustable Threshold

NO

Input Type

Non-Inverting

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

2 ms

Switch Type

Based on their characteristics, there are basically three types of switches: Linear switches, tactile switches and clicky switches.

General Purpose

Min Input Voltage

2.7V

Max Input Voltage

7.5V

Nominal Input Voltage

The actual voltage at which a circuit operates can vary from the nominal voltage within a range that permits satisfactory operation of equipment. The word “nominal” means “named”.

7.5V

Ratio - Input:Output

1:1

Voltage - Load

2.7V~7.5V

Fault Protection

Protection against electric shock under. single fault conditions.

Current Limiting (Fixed), Open Load Detect, Over Temperature, UVLO

Rds On (Typ)

30m Ω

Drain to Source Resistance

35mOhm

Features

Slew Rate Controlled, Status Flag

Height

1.48mm

Length

4.93mm

Width

3.94mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free