Micro Crystal CC1V-1.84320-TA-100

Package / Case

Axial

Mounting Type

Surface Mount

Supplier Device Package

Axial

Dimensions

8 x 3.7 x 1.75mm

Standard Frequency

1.8432MHz

Package Type

SMD

Maximum Operating Temperature

the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

85°C

Minimum Operating Temperature

-40°C

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C ~ 155°C

Series

RNF

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Size / Dimension

0.093 Dia x 0.250 L (2.35mm x 6.35mm)

Tolerance

±0.5%

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Number of Terminations

2

Temperature Coefficient

The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

±100ppm/°C

Resistance

105 kOhms

Composition

Metal Film

Power (Watts)

0.25W, 1/4W

Pin Count

a count of all of the component leads (or pins)

2

Failure Rate

the frequency with which an engineered system or component fails, expressed in failures per unit of time. It is usually denoted by the Greek letter λ (lambda) and is often used in reliability engineering.

--

Load Capacitance

the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

10pF

Frequency Tolerance

the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

±100ppm

Features

Flame Retardant Coating, Safety

Height Seated (Max)

--

Width

3.7mm

Height

1.75mm

Length

8mm