Microsemi Corporation APTGL475A120D3G

Factory Lead Time

36 Weeks

Mount

Chassis Mount, Screw

Mounting Type

Chassis Mount

Package / Case

D-3 Module

Number of Pins

7

Transistor Element Material

SILICON

Collector-Emitter Breakdown Voltage

1.2kV

Number of Elements

2

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

400 ns

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~175°C TJ

Published

2012

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

7

ECCN Code

EAR99

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

2.08kW

Terminal Position

UPPER

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

UNSPECIFIED

Pin Count

a count of all of the component leads (or pins)

11

Configuration

Half Bridge

Element Configuration

The distribution of electrons of an atom or molecule (or other physical structure) in atomic or molecular orbitals.

Dual

Case Connection

ISOLATED

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

200 ns

Power - Max

2080W

Transistor Application

MOTOR CONTROL

Polarity/Channel Type

N-CHANNEL

Input

Standard

Collector Emitter Voltage (VCEO)

1.2kV

Max Collector Current

610A

Current - Collector Cutoff (Max)

5mA

Voltage - Collector Emitter Breakdown (Max)

1200V

Input Capacitance

The capacitance between the input terminals of an op amp with either input grounded. It is expressed in units of farads.

24.6nF

Turn On Time

The time that it takes a gate circuit to allow a current to reach its full value.

270 ns

Vce(on) (Max) @ Vge, Ic

2.2V @ 15V, 400A

Turn Off Time-Nom (toff)

580 ns

IGBT Type

Trench Field Stop

NTC Thermistor

resistors with a negative temperature coefficient, which means that the resistance decreases with increasing temperature.

No

Gate-Emitter Voltage-Max

20V

Input Capacitance (Cies) @ Vce

24.6nF @ 25V

VCEsat-Max

2.2 V

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

RoHS Compliant

Lead Free

Lead Free