Murata Electronics CSTLS20M0X51-B0

Factory Lead Time

13 Weeks

Mounting Type

Through Hole

Package / Case

Radial - 3 Lead, 2.50mm Pitch

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

NO

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-20°C~80°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Bulk

Series

CERALOCK® CSTLS

Size / Dimension

0.217Lx0.138W 5.50mmx3.50mm

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Type

Ceramic

Capacitance

5pF

Frequency

20MHz

Frequency Stability

the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

±0.2%

Physical Dimension

L5.5XB3.5XH6.5 (mm)/L0.217XB0.138XH0.256 (inch)

Operating Frequency

Operating frequency is the frequency at which the communications are being made with the total bandwidth occupied by the carrier signal with modulation. Usually bandwidth of the antenna will be wider than the bandwidth of the signal so that more than one center frequency the antenna can be put in to effective use.

20MHz

Frequency Tolerance

the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

±0.5%

Features

Built in Capacitor

Height

0.276 7.00mm

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant