NJR CORPORATION NJL9601MD

Package / Case

Nonstandard

Supplier Device Package

1506

Package

Tray

Mfr

Vishay Foil Resistors (Division of Vishay Precision Group)

Product Status

Active

RoHS

Compliant

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C ~ 150°C

Series

VSM

Size / Dimension

0.150 L x 0.062 W (3.81mm x 1.57mm)

Tolerance

±0.25%

Number of Terminations

2

Temperature Coefficient

The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

±2ppm/°C

Resistance

16 Ohms

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

70 °C

Min Operating Temperature

-30 °C

Composition

Metal Foil

Power (Watts)

0.2W, 1/5W

Failure Rate

the frequency with which an engineered system or component fails, expressed in failures per unit of time. It is usually denoted by the Greek letter λ (lambda) and is often used in reliability engineering.

-

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

3.3 V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

2 V

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

5 mA

Features

Moisture Resistant, Non-Inductive

Height Seated (Max)

0.025 (0.64mm)