Omron Automation and Safety E2K-C25ME1

Factory Lead Time

7 Weeks

Mount

Brackets, Panel

Package / Case

Cylinder

Number of Pins

3

Material

ABS

Housing Material

Polycarbonate

Material - Body

Plastic

SwitchingFrequency

70Hz

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-25°C~70°C

Series

E2K

Published

2005

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Termination

Cable Leads

Voltage - Supply

10V~40V

Shielding

Unshielded

Ingress Protection

Ingress Protection rating (or just IP rating), is an international standard (IEC 60529) used to rate the degree of protection or sealing effectiveness in electrical enclosures against intrusion of objects, water, dust or accidental contact. It corresponds to the European standard EN 60529.

IP66

Reach Compliance Code

unknown

Termination Style

Cable Leads

Output Type

NPN-NO, 3-Wire

Lead Length

2m

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

24V

Operating Supply Current

15mA

Sensing Distance

It is the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fluctuation. (Normally, it is 70 to 80 % of the maximum operation distance.)

0.118 ~ 0.984 (3mm ~ 25mm)

Sensor Type

Capacitive

Indicator

HTS (Harmonized Tariff Schedule) codes are product classification codes between 8-1 digits. The first six digits are an HS code, and the countries of import assign the subsequent digits to provide additional classification. U.S. HTS codes are 1 digits and are administered by the U.S. International Trade Commission.

LED

Load Current

The Load Current can be defined as 1) Full load current the maximum current that an electrical machine can operate; 2) Rated Current the current rated on the nameplate of an electrical machine; 3) Nominal Current is generally mentioned in the specification documents that is normally the same value as the rated one.

200mA

Max Supply Voltage (DC)

40V

Outside Diameter

The outer diameter (OD) of a hollow circular pipe is the measurement of the outside edges of the pipe passing through its center.

34 mm

Min Supply Voltage (DC)

10V

Height

34mm

Length

82mm

Width

34mm

REACH SVHC

No SVHC

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

RoHS Compliant

Lead Free

Lead Free